|
Analog,
LTR® Conventional and
Digital* All in One
*With UT-119H installed.
Basic LTR®/Conventional
mixed mode operation
The IC-F3061 series
provides LTR®/conventional mixed mode operation. Group, selective (DTMF),
and phone call are available in LTR® mode.
IP54/55 Dust-protection
and splash, water jet resistance
The IC-F3061 series
meets IP54/55 requirements for dust-protection, splash and water jet resistance.
Its durable construction is backed up by the aluminum diecast chassis and polycarbonate
casing, allowing reliable operation under harsh weather and environmental conditions.
Lithium-Ion battery
pack
Supplied 2000mAh Li-Ion
battery pack, BP-232, provides 14 hours* of operating time. Icom’s
rugged dual-rail guide securely locks the battery to the radio. Optional battery
case BP-240 provides a convenient back up and great reassurance in an emergency.
* Typical operation Tx:Rx:Stand-by=5:5:90, power save on
Most popular
signalings built-in
The IC-F3061 series
has built-in 2-Tone, 5-Tone, CTCSS and DTCS
signaling capabilities as standard for
group communication or selective calling. 40 pairs of CTCSS/ DTCS memory channels
are programmable
independent of the operating channels. Also, the IC-F3061 series can decode ten
2-Tone codes or eight 5-Tone codes on a channel. When a matched tone is received,
the following actions are programmable for each code.
-
Beep sound
-
Bell
icon
-
Auto TX
-
Answer back call
-
Stun/kill radio
-
Scan
Wide frequency
range and large channel capacity
The IC-F3061 series
covers a wide frequency range in one version (VHF 136–174 MHz, UHF 400–470 MHz or
450–520 MHz). The 512 memory channel capacity with 128 zones allows you
to divide
and store a variety of flexible channel groupings. Memory channel selection can be made with a simple rotation of the rotary channel knob. Wide and narrow channel
bandwidth (25/12.5kHz, 30/15kHz) is also programmable.
Full dot-matrix
LCD
Using a large full dot-matrix
LCD (32 × 18 mm), the
IC-F3061 series shows upper and lower case characters clearly. The display setting
is selectable from 1 line, 12 characters or 2 lines 24 characters via programming.
The bottom row shows assigned functions to the [P0] to [P3] buttons.
Enhanced audio
The IC-F3061 series
employs a BTL amplifier that increases the audio output and the built-in audio compander
provides clear, low noise communications.
Voting mode scanning
The Voting mode scanning
detects the S-meter level of repeater stations and automatically selects the strongest
station, useful for roaming between 2 or more repeater sites. In addition, the IC-F3061
series has 10 scanning modes including priority scan and double priority scan.
Built-in inversion-type
voice scrambler
The built-in inversion
type voice scrambler provides secure conversation as standard. When a more secure
system is required, the 32 code non-rolling-type voice scrambler UT-109R and 1020
code rolling type UT-110R are available as an option.
Other features
-
8 DTMF autodial memories
-
2 step reduced power setting
-
Power on password
-
Busy, repeater lockout functions
-
Radio stun and kill functions disable a lost or stolen unit over the air
-
Surveillance function temporarily turns off the LED backlight and beep sound
-
Powerful 5W output both VHF and UHF and more...
-
Flash CPU for future upgrade and more...
|